One of the fixings on my cat is sheared and no time to drill it out and fit a new one. It was blowing at the joint with the downpipe.
However the remaining three fixings are there and I have placed a small g clamp in place to seal it temporarily. All is working as it should.
My mot retest is due. Only failed on tyres and missing cat
Will the g-clamp go through the mot?
Can you not drop into an exhaust place/backstreet garage on the way and get then to do a temporary weld on it. Just enough to fix it and allow you to cut the weld later. If a G clamp fixes it, you really won't need more than a tiny spot of weld.