Remote Key Zapper fixed
My remote key has been playing up for a while and finally refused to work, so I took the key to bits as pic 1 and removed circuit board by easing clips (yellow) and pulling out in direction of blue arrow.
On the other side of the circuit board as pic 2 there is a tiny microswitch (yellow Arrow) which was gunged up, so nothing to lose, I sprayed it and worked it in and out ( yes I know that will excite someone) with IPA (not Greene King) and then blew dry with compressed air.
Then cleaned out key and + terminal as pic 3 and rubber button inside (sticky) and reassembled and now red light comes on and all works fine.
Last edited by r100gspd; 07-07-11 at 11:02.