Planning the next
AO Silver Member
Join Date: May 2007
Location: United Kingdom
Some info which may help.
Looking at the switch that just happens to be sitting on my desk(!) it has the part number 60651644 inscribed on the side. This has green illumination, so if you check with a seller and ask them for the number you can rule any with that number out immediately.
Moving on, looking at eper for 1998-2005 there are four versions listed. Two have 'COL-080' by them and the other two have 'COL-020'. I suspect that 'COL-080' is green as that matches the part number above. The part numbers for 'COL-020' which I'm assuming are red are -
( you may be able to confirm one of those with your original switch ).
The second 'COL-080' ( green? ) is 60685343.
However, all that may be academic. Assuming the switches themselves work OK, why not move your existing switch units to the body of the one you bought from eBay? All you have to do is carefully prise out each switch unit from the housing ( four plastic clips each ) and transfer to the better fascia/rockers. They don't fly apart or anything like that. They are fully self contained units. Just ensure you keep the orientation the same!
Last edited by pkr; 28-01-11 at 09:23.