Hose clamps required - Alfa Romeo Forum
You are currently unregistered, register for more features.    
Thread Tools Search this Thread
(Post Link) post #1 of 1 Old 02-01-11 Thread Starter
Status: -
AO Member
Chris141058's Avatar
Join Date: Mar 2006
Posts: 227
Hose clamps required

Has anyone got any of the original CLIC-R hose clamps or know where to get them?
I know most people prefer traditional screw up hose clamps but at the end of a long day of replacing the spark plugs on my V6 166 it only took me a minute to tighten the 10 or so original hose clips as I have purchased the dedicated pliers for the job.
I am now thinking of also replacing the plugs in my GTV V6 but the hose clips have been replaced by the traditional type and plastic cable ties on the hoses around the stainless steel inlet ducts.
I would like to revert to the original CLIC-R clamps but cannot find a supplier.
Does anyone have any they don't need?
I need the 6 x 18mm clamps on the inlet ducts, the 26.5mm and 29.5mm clamps on the hose from the resonator and any of the smaller ones on pipes going into the air chamber.
The 6 x 16.5mm clamps lower down on the inlet ducts would also be useful.
Note the sizes are the circumferences of the clamps.
Chris141058 is offline  

Go Back   Alfa Romeo Forum > Supported Alfa Romeo Models > Technical & Vehicle Assistance > Alfa GTV & 916 Spider

clamps , hose , required

Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome