Yay most mountain
passes are open!
Join Date: Oct 2008
Alfadiag and a GTV V6
I recently could fix my airbag light problem and am quite happy with my GTV.
I got another little issue though. MY engine does rev up a little when i use the clutch before it settles down to idle rpm. Usually you don`t notice this but when i am in the city doing stop and go i feel foolish with my engine reving up a little everytime i use the clutch to go to neutral. And yes i got my foot off the acc-pedal when i use the clutch.
I read that i could use alfadiag to let the ECU relearn the correct positions.
If that is true i dunno how i would do that. All i can find in alfadiag is tests for the injectors and the like but i cannot find anything to set something or start a routine to relearn positions.
Am i missing something or does this ECU (It`s a 98 GTV V6 3.0 24v - should be Bosch 2.1 - i can also connect ME 3.1 OEBD but there not everything is available so i am quite sure ME 2.1 is the correct one) simply not support such a procedure?
What else could cause this issue i am getting? My shows the following behavior: Right after start it is at about 1.1k rpm and goes down to about 800 to 1k after like half a minute. Once the engine is warm it settle at about 650 rpm. Is that normal or do i hav