AO Gold Member
Join Date: Jun 2009
congratulations on the Spider! The problems that you have are all very common.
1.) Is that with the remote or the key? First thing i would do is to spray wd40 right into all locks and locking mechs as the car may have been sat for a while and seized up abit. The cable you need is OBD 16 pin interface.
Hope this helps?
3.) Unidiag is everybit as good and its free. The most common reason for airbag light is moving seat while key is in ignition and at MAC or engine switched on. NEVER move seat with ignition on. It could worse case scenario be the seat belt pre tensioner? most people solder the connections below the drivers seat so as to prevent the circuit being broken when seat is moved. Its a very, very common prob with GTV/Spiders.
4.) Type Unidiag into google and join forum and download! simple as. Yes it will turn airbag light off.
5.) As yours is a P2 you need a KKL interface 16 pin and your best bet is to email rarebear as he modifies cables so they can speak with all systems.