Oil Pressure Gauges / VDO
Have just fitted 3 VDO Gauges to my GTV T.Spk Ph.1..........Oil Pressure, Oil Temp and a Voltmeter. All original VDO sender units have been used to complement the gauges for oil pressure and oil temp with the volt meter being a direct wire in to supply voltage. However my concerns are that there the gauge readings are very slow to respond to changes of input from the engine. All do actually read very accurate measurements ,i.e. 1.75 Bar at idle and 4.5 Bar at 3500 rpm and over, with similar readings for oil temp and voltmeter respectfully, but appear to be very slow to respond to real time changes. Just wondered if anyone has any info on this disappointing issue....many thanks.