Spider roof mechanism bent?
I was putting my roof up yesterday and I noticed that one side was lagging the other. (it went down with no problems).
When it is fully up the hinged bar above the drivers window is not straight, probably about 10 degrees off straight. This obviously shortens the roof and it is very difficult to get the pin in at the top of the windscreen and I'm taking my windows life into my hands when i put the window up as it is striking the metal bar.
I'm thinking something might be bent in the mechanism. Everything looks straight enough, there are no loose nuts or pins etc and the pistons seem to be going through their correct travel.
Anyone any ideas?
I've never had any trouble with it before.
Thanks in advance.
Last edited by Spider G; 16-09-09 at 11:41.
Reason: spelling mistake in title!