Does anyone know how to adjust the timing of the windsreen washer pump. Mine comes on when I operate the lever for about 3 seconds then stays on until the wipers come to rest. I then have to use the intermittant wipe for a while to clear the screen of all the washer water.
Er... My washer/wipes operate in 2 modes.. if you flick the lever,the water comes out and they blades sweep continuosly for about 4/5 sweeps
If you pull the lever towards you, the water comes and the blades sweep as long as you keep hold of the lever, when you release the lever the water stops but the blades carry on for about 4/5 sweeps...
When you pull the wiper stalk and let go straight away, the washers spray first and very soon afterwards (<1 second) the wipers start to move. The water continues for another couple of seconds and then stops while the wipers continue for another couple of sweeps.
But... the washers stopped completely a while ago and eventually started working again - with a loud click?!. There is now an occasional fault. Sometimes the water sprays for a few seconds and other times you have to hold the stalk in to keep the water spraying!
Anyway. Sorry Donkin, I don’t have a clue how to adjust them. Not much use to you really!!