Yep.. its the same.. mine start to rattle and knock and then move if you grab the glass.. you need to take the door cover off, move the plastic and move the window down a bit so you can access the bolts and then tighten them up... you may need to so this a couple of times to make sure the alignment it right.. then put it all back togeatjer. being carful of the door popper lock things.. if they get out of alignment the central locking refuses to work.. just take your time.
Location: Malta, the sunniest Member State to be!!
Pete that's exactly what I was thinking... that red thread lock thingy they use when tightening cylinder heads - I'm sure it would stop window retaining bolts coming lose if it can retain 155 pounding horses from popping the head right off!!
My windows started rattling incessantly only recently, especially on the less than ideal roads we have in Malta...
Joe when you say 'move the plastic' once you remove the door card, are you refering to that flimsy pastic film that looks like a garbage bag? I had a good look at the doors on the inside when I upgraded the speakers in the doors so I have an idea.