as a few of you have been waiting or know, i bought the 8C wheels from EB Spares, then discovered they would not fit over the V6 brembo brakes...ok.
I then purchased the 20mm Eibach Spacer kit direct from Eibach, but it did not come with 40mm bolts.... tried to fit the standard 30mm bolts, they were not long enough to hold the wheel in place.
I received my 40mm bolts today....and im really getting frustrated at this...
a. The bolts seem to jam the hub from turning when they are screwed into the hub, as they come through the back!!
b. With the bolts screwed right into the hub (even though i know it wont turn) the wheels wiggle about on the bolts....its as if the are not long enough, but the hub wont allow them to go in anymore!!!
its defo the same bolts as standard except 10mm longer, i had to order them specially so needed all the spec..
i need help from any of you guys that have fitted eibach 10mm spacers on a V6 to tell me whats going on!!
thanks so much