Re: GTV with chattering relay and no ABS light
Fuse is F4. Fourth socket up on rhs of fuse tray. Note this is the 2nd fuse up as other two are vacant. However, manual states following (test J) for light not on at start up :-
Ck continuity between pin 12 of G273 and pin 3 of connector T8 and 15 on G273 and 1 on T8.
Turn key and ck earth signal at 0V for a few seconds between pin B3 and cluster C10.
Turn key ck for 0V for few seconds at pin 1 of G273.
Another ck is between pin 3 of G272 and C10.
G273 is located on N51, a control unit, as is G272 which is a smaller connector than G273.
A relay, I35, is indicated bottom rhs of fuse tray.
T8 is a diagnosis connector under dash used with the Alfa Romeo tester and C10 is the instrument cluster. Another fuse, G125a, 10A is a wander fuse not on the tray but close to it. G384 is in the boot as is G125b
Does your mechanic have access to a manual?
Last edited by armoore; 29-08-08 at 14:59.