Join Date: Nov 2007
Location: Caithness, Scotland.
Re: Heater not blower not working !
I had the same problem last year, the resistor had burnt out as there was half an inch of mud like slime in the bottom of the case that had shorted out the winding!
I had to take the dash out, followed by the heater box itself, I flushed it all out in the sink!
I switched it on before putting it all together to check all was ok & the winding glowed red hot!!! I switched it off quickly & all seemes ok, I guess the flow of (heated) air over the winding when its all together keeps it cool! Its been fine since tho....
I took the opportunity to repair the usual rot in the bulkhead, by the air intake at the same time, I used self tappers & seam sealer as welding was out of the question. Getting the dash back in & connecting the hoses to the end outlets on the dash was another matter tho'...