alright, so ive just put a multimeter on things, im getting power across the thick red and thick black wires for the MSD, this is just a power source to the MSD am i correct, the wires go straight to my battery terminals so is that not just measuring voltage across the battery? anyway the MSD has power going to it. the thin red wire is energized with the key on, going from the thin red wire to ground on the chassis. however, the coil is not energized, going from the 15+ connector onto the chassis i get no reading at all. I guess i have a good starting point now, the coil isnt getting any voltage so its not producing a spark but what does this actually mean in terms of troubleshooting?
thanks a lot for your help