33 shaped fire
Join Date: Sep 2006
Location: United Kingdom
33 16v air intake pipework
I have converted my car from 8v to 16v and have a couple of questions relating to the pipework running into the air filter box.
On the 8v it has a plastic pipe that joins to the front panel which then has a pipe attached to it which then joins onto the air filter box. I have looked on Eper but it only lists parts for the 8v models, does the 16v have this too? Numbers 16 and 17 in the diagram. I have the parts for the 8v but wanted to find out if the bore of the pipe was the same as the 16v, from memory I think it is something like 58mm.
Is the airbox the same for the 8v and 16v? They seem to be identical other than the rubber sleeve which fits onto the air flow meter which has a larger diameter on the 16v. Is the intake pipe at the bottom the same diameter for all versions? I think mine (from an 8v) is around 60mm
Any info would be much appreciated
Last edited by dickyb; 28-09-14 at 10:05.