33 shaped fire
Join Date: Sep 2006
Location: United Kingdom
Does anyone have a photo of a 16v carbon cannister and pipework?
I wondered if anyone had a photo of the vapour recovery system from a late 16v as I need to find out what the pipework looks like. I know that one pipe goes onto the pipe at the rear of the engine bay on the left side which then routes under the car and to the vapour tank in the boot. The other pipe joins onto the vacuum pipe union on the left side of the engine. However I am not sure if there should be a valve or some kind of electrical connector on the pipe that goes to the pipe at the rear of the engine bay. I am converting my 8v to 16v and I know that the pipes are different. If anyone had a photo I'd be really grateful...