33 shaped fire
Join Date: Sep 2006
Location: United Kingdom
Thanks for the tips guys, I'll contact Superflex and see if they could possibly drill them out for me, after all they must have to make the holes during manufacture. If not I'll try a combination of all your suggestions, I'd never have thought of the tape to hold them together or putting them in the freezer first so thanks for that.
Al, the bushes are the same shape as standard ones and use the standard clamps, they just have a 22mm bore rather than 18mm and are possibly beefed up a little. The larger inner bushes have a slit in them to aid fitting them, you open them up and push them onto the anti roll bar rather than sliding them on from the end. I don't think those Powerflex ones will work as they don't have the ridges and will probably slide out of the clamp.