1.7 engine is in my sud. need some help with coil
I have finally got around to putting the 1.7 hydraulic tappet engine in my sud. Im trying to get it running now but im not getting a spark. I swapped out the sud 1.5 coil and swapped in the 1.7 coil with 3 pin connector. Its all connected correctly it seems. Two white wires on one side of the coil and green and black on the other. The engine is in time and HT leads in correct order.
I have not changed anything since I saw the engine running in my mechanics workshop so it must be something to do with the way the coil is connected.
I have seen a picture on these forums of the coil wired with a white and green/black on one side and the same on the other. Should I wire it this way?