Drive it Like you
Stole it ;)
Join Date: Dec 2008
problem is that I cant remove my intake plenum, as this engine is different than yours.
Catalytic versions with the throttle position sensor, will still start and keep running without the intake plenum.
The non catalytic version with the throttle position switch, will stall and kill the engine as soon as you remove the intake plenum.
The gauges I borrowed and used, have readings from 0 to -3.
My readings were -2 on one side and -1.2 on the other side.
As much as I tried getting them to have the same values, I couldnt adjust one side past -1.5 or the other side lower than -2 !
Its like an on or off thing !!!
In any case, the adjusters I played with, were the ones over the vacuum slots and they were stuffed with silicone over the bolts/adjusters.
Are those the ones you played with ?