Car in bits again...
AO Silver Member
Join Date: Feb 2007
Location: Hampshire, UK
Man, that is one crazy set up!!!
What looks like one choke of a 58mm DRLA for each cylinder bank, with a (presumeably internally siamesed) inlet manifold machined out of a block of aluminium!
Clearly not going to have the same throttle response as a well set-up dual twin-choke arrangement. I guess if the humungous twin-chokes have gone, the single port inlet manifolds will not work with your standard carbs, so you will need a replacement pair of standard manifolds.
Hopefully a good clean up and new gaskets etc. are all that are required to get your existing carbs back into shape, although I have had a pair of Dellortos that were so badly corroded that I had to scrap them...
Good luck getting the induction system sorted.
Alfanauts are GO!!!