too much DIY to
think about cars....
Join Date: Mar 2007
Location: United Kingdom
tip we use at work, on i must say much larger seals, but it may be able to adapt it....
use a small self tapper screwed into the front face if the seal, with much car not to touch anything behind or to the side, put two screws in about 180 deg apart / around the seal then mole gips on the screw heads and pull out the seal.
if that dont work then a seal removal tool might do it, they look like a funny hook / bent screwdriver thingy,
these are used to pry the seal out
hope that helps