"The G99c connector you refer to, is that the 6 pin connector i have?"
Yes, with these wires:
1 grey, 2 grey green, 3 yellow red, 4 purple black, 5 grey yellow, 6 grey black
The vertical adjustment requires two DC motor assembly, one for each headlight.
These can be found mainly in 33s for the german market. Maybe these headlights
are differs from the "manual" adjustable ones, but someone else should confirm this.
The electric adjustment made possible to change the vertical projection angle from
the passenger compartment, so you don't need to pop the hood. But it's not automatic,
it have only three stages, which is not ideal for the HID conversion. (And the
alignment motor assembly is not designed for continous operation...)
"Where is the G124 connector? I can't find it
Again how do i wire up the T2 tester if the whole console is wired up with a + feed and then pulled to ground to make the circuit?"
I'll try to find some anwsers tomorrow (if someone else won't be quicker