I hope she's missing
Join Date: Apr 2009
I'm looking for some info regarding the Borletti speedo clusters - I've already asked on another forum but I guess asking here again won't hurt!
My speedo is not working and I'm sure there is no problem with the loom - there is good continuity from the dashboard to the sensor (from what I read this is a VR sensor, anyone can confirm?) and back. I did find a cooked resistor on the speedo electronics board though, and if anyone has info/photos of this resistor I would greatly appreciate them since I cannot read the colour markings on mine. The resistor is connected to the emitter of the transistor that in turn drives the needle motor so I'll change the transistor too.
This toasted resistor is the only resistor on the side of the board with big (through hole) components and with wire connectors.
Any help is welcome!