Thought its about time I updated this thread,
New inlet gaskets were fitted and the first run out was when Chris and Andrew came over, it run better, not as lumpy so pretty sure there was an air leak around the inlet and the fuel looked ok after our little run.
I should have two 8 x 16 RFX rims here in the next couple of days which will get 245/45 rubber and see if they help with the rear traction if not then I will chop the axle down by about 4" and get bigger wheels and better tires to sort the problem.
Was hoping to find a good holley carb tuner to do a final setup but non local so looks like a day trip to I.C.E and their rolling road.
Once the wheels are fitted I'll let you know if it worked.