sixnut the kittens are long gone
I've given a LOT of thinking into the wide body situation.
Sometimes I go to bed to sleep at night and think of ways and results
Kev, its metal sheet all the way ! I'll be learning new skills
sixnut the way I see it there are 3 ways of doing the widebody !
1. From where I cut the wing ( from the "line" of the car ), come up to 7 cm out progressively from front to rear and close that gap progressively as it goes back. Then come out at the bottom section ( where the sills are ) another 7 cm and close those 2 pieces with a sheet of metal rounded to shape.
2. cut the wing from the upper "line" of the car, under the rear window and come 5 cm out from there. Come 3 cm out from the middle "line", where its now cut ( the middle line from the rest of the sheet metal is about 2 cm out from the factory ).
Then do the same from option 1 to close the rest.
3rd option is to take the wide body from the middle of the front door and back ( kinda like the Group B ).
.... as I said, I will have to make some drawings on carton and cut them up so I can get a better picture of what it will look like and make my mind up