age is only a number
AO Gold Member
Join Date: Aug 2004
Re: Hub Nut
In that case a lot easier to remove the drive shaft / front hub and lower wishbone all in one go....
Don't need to remove the hub nut, but do need to undo the six Allen bolts at the inner end of the driveshaft. Need a GOOD 6mm Allen inhex socket, and ensure its properly seated ( a tap with a hammer is always a good plan), then try not to skin your knuckles when it finally cracks...they are Tight! Generally the 13mm nuts on the inside end stay "captive", but you may have to fiddle around to get an open-end spanner on....
AROC Vice-Chairman and Lancashire Section Secretary
Alfa organ donor to the gentry......