Abs Light after hub-bearing change - Alfa Romeo Forum
You are currently unregistered, register for more features.    
Thread Tools Search this Thread
(Post Link) post #1 of 2 Old 22-03-09 Thread Starter
Status: -
AO Member
Join Date: Nov 2008
Location: Sweden
County: -
Posts: 23
Abs Light after hub-bearing change


I Changed the hub-bearing on both sides on my 166. On the left side the abs sensor was ok, but on the right side i broke it a little when i pushed out the old hub bearing.
Anyways, i put everything back in its order and start to drive the car, after some metres the abs light was active....

Anyways i took an used abs sensor and put it back, but same problem that the light is active..... I have to add that the light seems to be a little weak with its shine compared with the other warninglamps.

Do you guys think its necessary to reset this with diagnostic computer, or what could be the fault?
Anson is offline  
Sponsored Links
Status: Bavarian
Admin Team
bobda's Avatar
Join Date: Jul 2002
County: -
Posts: 15,247
Images: 13

Member car:

Not a GT

Re: Abs Light after hub-bearing change

The ABS light doesn't need to be reset with diagnostics - if the circuit is closed and operational, the light goes off.

If you have swapped the broken sensor over with a working one, it seems like you may have disturbed or broken something else than the sensor.
bobda is offline  

Go Back   Alfa Romeo Forum > Supported Alfa Romeo Models > Technical & Vehicle Assistance > Alfa 164 & 166

abs , change , hubbearing , light

Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome