Originally Posted by niallmoran
don't suppose you have a good condition left hand knob? Mine is looking pretty crappy now....
From a previous post:
On the subject of ICS knobs, they are available from the dealers but the prices are a bit high (about £20 for the pair), especially for us Scottish folk.
I purchased some knobs from RS Components (
rswww.com | Welcome to rswww.com) that don't look too bad.
For the LH knob, with a 6mm shaft size, I used RS No. 467-6061 and for the RH knob, with a shaft size of 6.4mm, I used RS No. 467-6752. There is a choice of colours - I chose a rather fetching blue and green combination.
The LH knob fits straight on but for the RH knob I had to open the hole up by 0.05mm (a midges dcik) with a Dremel (the RS part is to suit a 6.35mm shaft).
The knobs cost 18p for the LH and 20p for the RH - but you must buy them in bags of 5 each. So thats £1.90 + VAT to do the job 5 times!!!!