Join Date: Aug 2009
Location: I would rather not say
alfa 1.9 16v wont start
Hi, my 159 1.9 16V JTD's crank pulley fell apart, threw the aux belt which jammed and jumped the timing belt! Took off the cam carrier and all rockers intact so very lucky. Put it all back together, timing carefully set using locking tools, cleared all fault codes with FiatEcuScan but it won't start. The engines cranks healthily but it does not fire at all, so I suspect the injectors are not activating.
The engine management light is on and I can't clear it with FiatEcuScan. The crank sensor has a resistance of 770ohm, fuel is getting to the injectors as tested by taking off the leak pipes and each injector is leaking approx the same amount. How can I test the cam sensor?
Any further ideas greatly appreciated?