Ive taken the hit and bought new motors. Im guessing they are both the same for left and right just flipped upside down...
Does anyone know how to fit them? It appears the poka yoke connecting to the flap mechanism is the opposite for each side.
Do you have to open them up and change the gear position? It seems there are two pins from the ECU to power the DC motor and three to locate its position. Im assuming the middle pin is common ground and two positives either side of ground? From testing both motors Ive taken out of the car for continuity, they appear to be opposites, is this normal:
One unit there is a reading from pin 1 and 2. On the other there is a reading on pin 2 and 3. Im wondering if this is how they should be or should the ECU be recognising both open/closed.
Any help around flap motors would be FANTASTIC!!!!