166 spares for sale.
Join Date: Sep 2009
Location: United Kingdom
Off to my brothers tomorrow who will advise on connecting to the fuse box.
Heating elements went onto the seats easy enough, prise open the rings with a pair of pliers and peal back the leather, stick the elements onto the foam using the adhesive strips then replace the leather, kit comes with new rings but not enough to replace all the ones removed so don't throw them away. Switches fitted in the plastic panels at the lower corners of the seats, instructions say to drill 20mm hole, however I drilled a 19mm hole and trimmed burrs with sharp knife and file, if I'd made a 20mm it would have been too big.
The loom sits quite neat and tidy under the seat base and is plenty long enough to reach the fuse box, the seats are back in and all wiring out of sight, so far so good, just have to see how well it works once it's connected up.
I've not taken any photos because I didn't really see the point, the instructions in the kit are straight forward and easy to follow, but I will try and remember to take a photo of the switch in situ.