negantem non est
AO Silver Member
Join Date: Jun 2011
Yes really easy in less than 15 mins
Remove the outer rear light as there is a screw going downwards in to the top of the bumper under them.
Remove the two screws under the bottom edge of the bumper.
Then from memory there is 4 screws in each wheel arch one right underneath behind the wheel, two in the curve and one vertically on between the bumper and the body.
Then you pull the edges out above the wheel and from around the bottom of boot opening, remember to disconnect the parking sensors and number plate lights before you walk away with it.
" full works
60mm Core Full size RS500 FMIC
AEM W/M Injection
Koni struts / Novitec springs
Grooved & Dimpled discs and pads
19" Prodrive wheels, Michelin Pilot Super Sport
Halo's HID's & LED's
Hub dyno'd at well over 500lbft
at the wheels !
and that's limited.
Thats over 750 Nm for you figure fiddlers
Last edited by coxy1; 10-12-13 at 15:38.