Angel tuned tyre
AO Silver Member
Join Date: Mar 2009
Location: United Kingdom
You will need a deep reach socket (13mm on mine) to remove the strap holding it down. Then unclip the -ve and push out of the way. Then unclip the +ve cover, remove the 2 screws and undo the +ve terminal and push out of the way. Lift the strap off, remove the old battery. Remove the jacket and fit to the new Bosch, and refit in reverse order. For whatever reason, the new Bosch must not be as tall as the original as the strap stays loose...I just used some dense foam insulation layered up to put under the strap to hold it down until i can be bothered to make a prettier solution.
The battery's cranking power on cold mornings is brilliant, a real bruiser