159 engine has come off mount
Hi all, something has been bothering me since my car went on the back of a recovery truck yesterday.
The car has recently been in for various problems and has had a new clutch followed by new EGR and lastly a new turbo in the last month or so. Following the clutch replacement i had fumes coming in the car and a colleague of mine found a loose bolt on the engine (possibly the egr housing) where soot was blowing out, anyway, yesterday less than 1mile on my journey i went over a speed bump and the car juddered and had to turn it off and wouldnt start again.
Upon inspection it bacome clear that the engine had come off its mount on the gear box side, the bolt was laying loose in the area and presumed it had sheered.
The car is now at my office until tuesday but i am now wondering if the bolt just not tightened up properly, the bolt i saw was about 30mm long and probably m8/m10, didnt notice if it looked snapped or not.
Does anyone know the length this bolt should be as i cant look at it until tuesday and im loosing sleep over it.
The car is a 2007 159 1.9jtdm lusso.
Thanks in advance