proud owner of a 159
Join Date: Sep 2011
Location: United Kingdom
HI there just done mine, took me all day. could do next faster. it helps if you got 2 pairs of hands.
jack up front of car and support on axle stands but wishbone must be hanging free. Their are not to many bolts to undo. but the ball joint is not the usual taper type. its a clamp type which can get rusted in, which mine was so once the nut and bolt are removed(undo nut first then bolt should hammer out leave nut in place to protect thread) mine would not move so undo the 15mm nut on bolt end use a 6 sided socket not star, and plenty of wd40. then i had to use a ball joint splitter 2 prone folk type to crack it. I FOUND a smaller type jack