I'll be back in an
Alfa 1 day
Join Date: Jul 2009
Location: United Kingdom
The vents need to be pulled out using a special tool. I used a metal coathanger. Cut the long piece (that you would hang some jeans on maybe) and then bend it in half. Turn up the ends so they loop back about 15 cm. then insert into vent near top and try to hook the back of it with the 2 upturned parts and pull - not too hard mind. All three need to come out as there are 3 screws behind that need undoing first
you also need to remove the aluminium arounf the gear shift to get to the bottom 2 screws that hold the dash in place.
Last edited by lanceshaw; 08-06-12 at 15:45.
Reason: missed a bit