159 boot lid net - installation advice required
I'm looking for some installation advice for the under boot lid net.
I have a net, but no fitting instructions. The net came with 3 different fixings:
2 plastic screw-in
4 short bolts with steel nuts and
2 long bolts with expanding rubber nuts (rubber rawlnut type)
I am guessing the 2 screw-in type hold the elasticated opening part of the net at the top, the 4 steel nuts go along the bottom and the 2 with rubber nuts to the side. I'm concerned that if I put the 4 steel nuts along the bottom they will rub or rattle against the inside of the boot lid even though there is a cut out in the lids inner skin. Any info on how to install the net or feedback from an installation would be most welcome.