Brera rear tyre wear
Have now done 31k miles in the Brera and well into the second set of tyres which were put on after 18k or so. The problem is both rears now need changed although the fronts are okay for a while yet. This is different froom the way the first set went down (as expected) - fronts first then swapped with the back, then all changed at the same time.
The rears have been checked regularily and tyre pressure is okay (33-36psi as per manual), and wear appears to be even all over. Both sets have been Bridgestones.
Anybody any ideas for the reasons for this? (It's a 2.4 diesel)