Join Date: Nov 2002
Re: 155 Q4 hormann clutch kit
I had a 6-puck sprung centre sintered plate in my Q4.
It was made by a local guy in Hungary (he's an expert,manufacturing racing clutches for competition cars).
I could slip the clutch,no judder whatsoever in heavy traffic.It was excellent.But it is much harder on your tranny etc.
The main problem with the Q4/Delta Integrale clutch is the cluth cover is very weak,can't apply too much pressure.
If I were you I would go with an organic uprated cluth made by Helix,or with Sachs Racing.