please help about tps
Hi to all,
after calibrating afm i'm prety sure that my throttle position sensor isnt correct. i found some instructions on the net about testing it (3 wire socket), and according to that with engine off, on idle, resistance between pin on the top and middle one must be 0 ohm, and i got 1.95ohm. with full throttle must be infinity, and i got about 5 ohm.
and other thing, there must be heard "klick" when throttle move from idle position, but i cant hear anything.
there are two screws for adjusting the angle. please can somebody confirm that there must be 0 ohm at idle and can i adjust that becouse i dont want to spoil tps. anybody done that before?