I wanna go back to
Join Date: May 2004
Location: North of Northern England
Re: lambda sensor?
not necessary to get a mech to do it if you can get under the car, gotta use ramps or with one side of the car on a high kerb or similar, you'll need a 22mm open spanner and a piece of string to make you life easy, in the middle of the bulk head, behind the engine there's a black box, take that off & you'll find a connector with 4 wires, that's the lambda, unplug it and attach your bit of string, go under the car, pull the wire down, unscrew the lambda, out the new one in and use the bit of string to get the wire back uo to the top of the engine... dead easy really, should only take about 10 minutes....