Re: V6 belts and engine mounts
Was thinking of making a couple of pan stands out of the cams, although theres some dutch guys interested in putting then in thier engines so we'll see
To be honest after 4 months in bits, we carnt remmber which bits fit which engine, the 2.5 bits are much newer really, so trying to limit any further problems by mounting them to the 3.0 block, but everything needs fitting 2/3 times trying to get it right, turning into a nightmare really. I dont think the 1 inch to the left will help, thats only needed for the 24V, dont fancy cutting and lenthening the drive shafts either !!!!
High lift cams for the 3.0 come in at 420 quid and give 250 BHP.... a nice round number i feel