The Defi Gauge looks nice. Is it 840 USD for all of them? Where do you find them?
In Japan Defi gauges
And what is EGT?
EXHAUST GAS TEMPERATURE.
Running in a lean (a/f) condition or incorrect ignition timing can caused an extreme high exhaust temperature and might caused damage to our turbo engine.
Another I wonder is about the turbo. You talk about 300-320 hp and intends to use a Trim60 compressor. That compressor is as far as I know dimensioned for 300 hp.
IMHO it should be able to deliver power to about 350-400HP. Look at this site www.turbofast.com.au
I don't doubt you can get 320 hp from it, but with that serious list of expensive components, why don't you go for a better turbo?
For 1200 USD you get a ball bearing T28 that holds for 350 hp and 2.2 bar.
I'm not sure, that BB turbos so are good, as about them write
I tried to drive by such BB turbo and has not felt any advantages. wink
I agree with your opinion on what is necessary to reach 300 hps in all aspects except exhaust manifold and head bolts. Of course it helps, but it is not necessary.
It's not enough of the real information on it devices, therefore it is necessary to experiment on itself wink
It might also be possible with standard pistons as long as you don't push it to hard on high revs.
I'm agree with U. But I fix the lightweight flyweel and lights pistons. Revs cut will be on 8000.
Good luck with your impressive modifications
Large thanks! Soon I'll try to tell you the details of my upgrades.