take the seats out!?

[adam0073]

Can someone please give me some directions on taking the seats out of a 155?

[rgwm]

From memory, front seats are held in by 4 allen screws - the front ones vertical through the runners, the rear ones, IIRC, horizontalpointing forward from the rear....

The rear seat squab is held by two allen screws at the front, once the squab is removed you can access the two allen screws that hold the nbottom of the seat back, once these are removed it can be pushed / sprung upwards to free it from where the clips fit through the bulkhead....

HTH

Richard

[celadon]

Yep as above, front seats held in by 4 bolts.
Mine are normal 13mm bolts, not allens.
You will need to remove the plastic cover from the lower side of the seats to access the door-side bolts that hold the seat to the runner.

Once you have the 4 bolts removed, REMOVE THE SEATBELT WARNING LAMP CONNECTION, move the seats forward to unhook from the rear, then lift up and out.