Originally Posted by dannyboy201062
Anybody out there with the programming info ?? I`m grounded at the minute and need the car to get to work. Its an `04 facelift 156 1.6 Lux.
Any help appreciated..............Dannyboy.
Emergency start procedure. you should have been given the code card, when you bought the car.
It is a pain, but better than walking.
If you make any mistakes, turn the key to STOP and then start again.
1 Read the code on the card
2 Turn the key to MAR
3 Keep the accelerator pressed full. The engine management light will come on for 8 seconds then go off. Now release the pedal.
4 Warning light flashes, but count the number of times it flashes (this is the first digit of the code) then hold down the accelerator until the light is steady for 4 seconds. Then release the pedal
5 Warning light flashed (for the number of the second digit of the CODE) and press/hold the accelerator again.
6 Repeat this for the last 3 digits of the CODE.
7 After the last digit of the CODE, the the accelerator pressed (do not release) as the warning light will stay on for 4 seconds. When the light goes off, then release the accelerator.
8 The warning light should flash for 4 seconds to show the process is correct.
9 Turn the key from MAR to AVV without returning to the STOP position.
If the warning light stays on, the process was not done correctly. Start again from point 1.