156 selespeed clutch adjustment
I know there is other posts about this but I have only one question.
Found this procedure on several forums:
Load up Examiner or Alfadiag and select the "Selespeed" ECU, connect and then go to the "Sensor" tab, in the drop down menu select "Clutch Adjustment Position" and check the position on the graph. If it is outside of 28 - 28.5mm then continue, otherwise your done.
On my alfaobd PC and Android versions it says
Current length: 20.664mm, it should be between 17.68-19.32mm
Should I adjust 28-28.5 or 17.68-19.32, and what will I get as a result of adjusting?
P.S. The test was done on cold engine only with ignition on, before the test changed the gears few times 1,2 and R