2006 147 JTDM Turns but won't start
I have been racking my brain to try and find some info and i hope you guys can help.
Firstly i was getting the glow plug error, tested the plugs and found the culprit and changed it. No problems car started fine but was running rough at low revs. I then cleaned the injectors but after reattaching them the cars turns but wont start now. I plugged in the diagnostic and no fault codes appeared
I am now at a loss, i have read a few threads that suggest that it might be the crankshaft or cam sensor. I have removed the Crankshaft sensor but dont know what the correct ohms reading should be. Should i just replace it? If so i will have to order it, are there any other things i can check to eliminate any other problems?
Any help would be appreciated, I would rather fix myself and take it to the mechanic as a last resort.