Medio Grigio AO
Join Date: Mar 2008
Any help appreciated with this as its not gone well
Before disconnecting anything we had all five forward and reverse gears no issues with the selection of them, other than vagueness at the gearstick selector and non returning position of the gearstick.
Now we have 3/4/5th and reverse but no first or second even though the gearstick notches through all 5 forward positions and reverse. First is actually 3rd and second is actually 4th, third is 3rd etc..
With the below diagram and assuming the cables are disconnected can someone confirm that with part A in position under the top lip of the gearbox linkage, when bolted up part B is vertical or at minus 90 degrees to part A.
Last edited by Alfaomegatron; 07-11-15 at 14:42.
Reason: add picture