C630 gearbox shafts bearings: shimming and pre-load???
I'm rebuilding my 04' GT JTD gearbox (the C630 one, not M32) and couldn't find instructions for shimming and preload values for the main shaft and lay shaft.
I noticed in the eLearn that shimming instructions and preload value are specified for the differential (+0,12mm) but not for the gearbox shafts. In any case different shafts shims are available from the dealer, so I think shimming is a must after changing the bearings.
¿Does anyone know something about shafts pre-load values or shimming instructions?.