AR156 Selespeed calibration issues
Sorry for bad english. My selespeed can't pass the "Production/Service final calibration" procedure after the reassembling. It stops with "1st-2nd sel. error" message (I using the MultiECUScan software). Yes, my clutch valve is in pretty bad condition, but the robot was successfully calibrated several times before I dismounted it for checking the clutch valve.
I think the problem is incorrect readings from the gear position sensors. I replaced all the sensors, but that didn't help. Can anyone share the readings from the working selespeed so I can compare them with mine. I need the readings of all the sensors (except the clutch position, of course) in extreme and middle positions (neutral, even gear selected, odd gear selected, top row and bottom row etc.).